AutoClave Testing We recommend pre-locking the BarbLock® Collet when AutoClaving is required. For maximum holding power final assembly should take place after the cycle is complete.

The BarbLock® 500-Series Ultra-Secure Tubing Retainer shown undergoing autoclave testing. The retainers were subjected to a total of 3 one hour cycles @ 130° C and 17 PSI. The components were then tested for dimensional stability, pull off strength, and sealing properties. The results for pre-locked & stand alone autoclaved retainer samples are equal in every respect to pristine BarbLock® Sleeve & Collets. Note: BarbLock 250 Series retaining drain hose to brass fitting (Lower Right)

When AutoClaveing Barblock® Retainers