Data Sheet 
Tech Updates
Oversize
Fitting Assembly
Reduce Assembly Effort
Fluid Path Restriction
Tech
Data
BarbLock® Assembly
Removing
BarbLock
Testing
Pull
Off Testing
Pressure Testing
Irradiation
AutoClave
Test Results
| 
|
BarbLock® Removal Tool Data
Part Name: Removal
Tool
Part Number: TB01STDRS
Removal sequence: Starting with the
BarbLock™ assembly
While wearing your safety glasses...
- Place
the assembled BarbLock® between the jaws. (Diagram
A)
- Make sure the hooked portion of the upper jaw is sitting on top
of the sleeve. (Diagram A)
- Ensure the base of
the Sleeve is sitting in the dished portion of the lower jaw. (Diagram
A)
- Continue closing the pliers with a ratcheting motion until the
pliers is closed.
- When the pliers are fully closed, firmly grasp the
sides of the Sleeve with you free hand. (Diagram B)
- Wearing
a pair of gloves, safely peel off the Sleeve from the assembly and remove the
Collet.
- The Sleeve is made of polypropylene and should be disposed of
in the proper manner.
return
Disclaimer:
Twin Bay endorses the proper use of hand tools. BarbLock tools should only be
used in the manner described within the BarbLock® Tool Data Sheet. Always
keep your hands away from the jaws and moving parts during operation. Twin Bay
makes no claim as to the design, manufacture or any contractual relationship relating
to Advance Concepts, Inc. (Manufacturer of Robo Grip ®).
*Base Tool:
Robo Grip 6-inch pliers
**Modified by Twin Bay: Jaws shaped for Sleeve removal
Twin Bay is the sole manufacture of BarbLock tools / BarbLock tools are patent
pending / All rights reserved by Twin Bay, (Division of TBM) |
|
