Part Name: Removal Tool
Part Number: TB01STDRS
Removal sequence: Starting with the BarbLock™ assembly
While wearing your safety glasses...
- Place the assembled BarbLock between the jaws. (Diagram A)
- Make sure the hooked portion of the upper jaw is sitting on top of the sleeve. (Diagram A)
- Ensure the base of the Sleeve is sitting in the dished portion of the lower jaw. (Diagram A)
- Continue closing the pliers with a ratcheting motion until the pliers is closed.
- When the pliers are fully closed, firmly grasp the sides of the Sleeve with you free hand. (Diagram B)
- Wearing a pair of gloves, safely peel off the Sleeve from the assembly and remove the Collet.
- The Sleeve is made of polypropylene and should be disposed of in the proper manner.
Disclaimer: Twin Bay endorses the proper use of hand tools. BarbLock tools should only be used in the manner described within the BarbLock Tool Data Sheet. Always keep your hands away from the jaws and moving parts during operation. Twin Bay makes no claim as to the design, manufacture or any contractual relationship relating to Advance Concepts, Inc. (Manufacturer of Robo Grip ®).
*Base Tool: Robo Grip 6-inch pliers
**Modified by Twin Bay: Jaws shaped for Sleeve removal
Twin Bay is the sole manufacture of BarbLock tools / BarbLock tools are patent pending / All rights reserved by Twin Bay, (Division of TBM)